-
by leealex
The SMTAV camera has a default IP address which is 192.168.100.88.
If you have connected the camera's HDMI to a monitor or display device. When the...
-
by leealex
First, connect your camera to your router as shown below:
Then Choose your computer’s operating system.
For Windows XP:
Step 1
Click Start->...
-
by leealex
How do I set up my SMTAV camera to be “on my network”?
The first thing you are going to want to do to get your camera up and streaming on your n...
-
by leealex
-
by leealex
1 Setup IP Controlled by Dynamic DNS
Two dynamic DNS: Dyndns.org, 3322.org.
Router Port Mapping:
Take Tenda router for example, enter the Router...
-
by leealex
When you are first getting setup it is helpful to connect your camera to an HDMI monitor, but you can also use the SDI output to view video from yo...
-
by leealex
The camera's resolution is set by a yellow dial on the back interface board of the camera. you can reference the available frame rates in your manu...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
